Artificial Girl 3 + Expansion: Clothing Thread

[goram5]

Took me some time to figure it out a this is just how i got it to work. Ok you take and work this on line 9 of the js02_01_01.lst in notepad and change the 7 on line 0 to 8.

Spoiler

Hope this helps or someone with more knowledge will explain it.

wait a min, i don't have js302_01_01.lst but the 02.lst, they're the same file, or maybe i must create that and copy your text , or what?

ed: ok, i found it, but doesn't work. the only hope is waiting this mod for wizzard ^^

[spexwood]

YAY! Thanks to h_king's suggestion I found the mod, I hope it is the right one:

Spoiler

filename: upjs3mod0957.zip

If someone could tell me what to do with this files I would be very grateful!
I know there's a readme file but I can't open it up properly, notepad prints some stupid fonts instead of kanji/hiragana/what is there, I've installed the fonts for asian languages but it doesn't makes any diffrence
Thanks in advance

I am currently trying to catch up in what is going on in the forum, so I haven't read the last page yet LOL, but if no one has figured out how to install this yet, here is what I did:

Spoiler

1) Put a40_01_99_01.xx in js3_00_07_00.pp using AG3Decrypt

2) Save the .rar file in my attachment and extract it.
Then, move Leotard_Arms_&_Legs.bmp to the ...save\m_tex\01_01_01_to folder

3) Use AG3Decrypt to unpack js3_00_00_00.pp

4) Inside, open js02_01_01.lst with notepad and overwrite one of the unoccupied spots with the following code:

** 0 js3_00_07_00.pp js3_00_03_00.pp js3_00_03_00.pp js3_00_04_00.pp Arms & Legs a40_01_99_01.xx 0 0 a01_O_wanMKWtO_01 a40_02_09_01_s.uv a40_02_09_01_l.uv a40_02_09_01_s.mpt a40_02_09_01_n.mpt 0 0 0 0 0 0 0 a01_N_Zentai_01 a01_N_Zentai_01 0 a01_N_Skeleton_01 1 0 0 c02_ref01.bmp c02_ref02.bmp c02_ref03.bmp c02_ref04.bmp 0 Arms No Arms 0 0 0 Legs High Cut Legs No Legs 0 0 Leotard_Arms_&_Legs.bmp 0 0 0 0

** = slot number

NOTE:
This code is editted slightly from the original. It was not changed in any other way except for describing what the buttons on the right side of the AG3 Maker do, setting the default subtexture to 0, and setting the default main texture to the one I am providing. All credits would still go to the original modder, whether he is Japanese or not.

5) Save the file and repack js3_00_00_00.pp with AG3Decrypt

Hope this helps, if it is needed LOL

[Raiden0127]

Ok, I got mine working. After you drop in the a40_01_99_01.xx into js3_00_07_00.pp, decompress js3_00_01_00.pp. Find js02_01_01.lst, open it with notepad, then use lostsoul's

0 js3_00_07_00.pp js3_00_03_00.pp js3_00_03_00.pp js3_00_04_00.pp systemic tights a40_01_99_01.xx 0 0 a01_O_wanMKWtO_01 a40_02_09_01_s.uv a40_02_09_01_l.uv a40_02_09_01_s.mpt a40_02_09_01_n.mpt 0 0 0 0 0 0 0 a01_N_Zentai_01 a01_N_Zentai_01 0 a01_N_Skeleton_01 1 0 0 c02_ref01 . bmp c02_ref02.bmp c02_ref03.bmp c02_ref04.bmp 0 arm leg leg 0 0 0 (high-cut) None 0 0 a40_01_99_01_00.bmp a40_01_99_01_01.tga 0 0

and paste it in the LAST LINE. (Makes it easier IMO) Then, look at the line above, and match the file positions. If it's off by even one spot, it screws it all. Oh, and Tab will push the text in front of the cursor to the next line. Also, you won't need to change the 7 to 8 on line 0 if you've already applied Darkhound's lst files clothes expansion mod. It'll already have a limit of 100.

EDIT- Ok, here are 3 of the 5 costumes.
#1
http://www.megaupload.com/?d=L9OK4BYT
http://i110.photobucket.com/albums/n.../Stuff/002.jpg

#2
http://www.megaupload.com/?d=HT9NDAL7
http://i110.photobucket.com/albums/n...f/c95d95fa.jpg

#3
http://www.megaupload.com/?d=N8JN24M8
http://i110.photobucket.com/albums/n...f/764abb54.jpg

[T0mcat99]

... Then, look at the line above, and match the file positions. If it's off by even one spot, it screws it all...

Very important, this bit!!!

You just beat me about 5 minutes... had managed it too, due to the posts of lostsoul023 and spexwood.. Big thanks to You two

[lostsoul023]

yes i redid the file about 3 or so time knew they had to line up just have to find where they end. Thanks to spexwood and raiden for clearing it up.

[goram5]

after to have put the mod, ag3make crashed. wtm?

[Quintasan]

Ok, I got mine working. After you drop in the a40_01_99_01.xx into js3_00_07_00.pp, decompress js3_00_01_00.pp. Find js02_01_01.lst, open it with notepad, then use lostsoul's

and paste it in the LAST LINE. (Makes it easier IMO) Then, look at the line above, and match the file positions. If it's off by even one spot, it screws it all. Oh, and Tab will push the text in front of the cursor to the next line. Also, you won't need to change the 7 to 8 on line 0 if you've already applied Darkhound's lst files clothes expansion mod. It'll already have a limit of 100.

EDIT- Ok, here are 3 of the 5 costumes.
#1
http://www.megaupload.com/?d=L9OK4BYT
http://i110.photobucket.com/albums/n.../Stuff/002.jpg

#2
http://www.megaupload.com/?d=HT9NDAL7
http://i110.photobucket.com/albums/n...f/c95d95fa.jpg

#3
http://www.megaupload.com/?d=N8JN24M8
http://i110.photobucket.com/albums/n...f/764abb54.jpg

WTF is a js3fsi file?

EDIT: got it working, nvm, thanks for help lostone.
Does anyone knows is there a tutorial making mods wizz friendly?

[goram5]

lostsoul banzai !!! you resolved all the prob of this mod

[Raiden0127]

Does anyone knows is there a tutorial making mods wizz friendly?

I'm looking at other wiz mods and I'mma use that to make this wiz friendly if I can.

[Raiden0127]

OK. The actual wizzard ready mod is within the first .7z
The text documents are the instructions and correspond with the .jpg's.

http://www.megaupload.com/?d=DWS0W051